Description
Rechargeable PIR Cabinet Light
Rechargeable PIR LED cabinet light for kitchens, wardrobes, shelves and cabinet furniture. No driver wiring is required.
USB-C charging and magnetic mounting make it easy to install, remove and recharge. Choose all-day sensing or night sensing, then set brightness and color temperature on the fixture.
Key Features
- PIR motion sensing with 120° coverage, within 3 m (10 ft)
- All-day sensing mode or night (dark + motion) sensing mode
- Auto-off after about 20 seconds with no motion in sensing mode
- Always-on and off positions for manual use
- Short press for brightness steps; long press for stepless dimming
- Warm white / Neutral white / Cool white, freely switchable
- USB-C rechargeable, 5V 1A; red while charging, green when full
- Magnetic mount with adhesive metal plates
- Two lengths: 25 cm / 1800 mAh or 35 cm / 3200 mAh
- Ideal for kitchen cabinets, wardrobes, shelves and furniture projects
Technical Specifications
Sensing Modes
Night sensing (dark + motion)
Use in low light. The light turns on only when it is dark and motion is detected. The fixture flashes 3 times when this mode is selected.
All-day sensing (motion only)
The light turns on when motion is detected, day or night. The fixture flashes 2 times when this mode is selected.
Forward approach gives the strongest detection. Side movement is weaker, and movement behind the sensor is not detected. Do not block the sensor, including with transparent objects.
Installation
Stick the adhesive metal plates to a clean, dry surface and press firmly. Attach the light magnetically. Remove the bar to charge, then snap it back onto the plates.
Fully charge before first use. Use a certified 5V 1A adapter. Do not operate the light while charging.
